Product Description

LPG TANKER (TRAILER) TRAILER 45 M3;

TANK TYPE: Horizontal Cylindrical PROJECT CODE: AD- Merkblatter / EN 13445 DESIGN TEMPERATURE: Min -20 ° C / maximum + 70 ° C DESIGN PRESSURE: 17.5 bar TEST PRESSURE: 26.5 bar MATERIAL : P355 GH or P355NH HEAD TYPE: ellipsoidal EXTERNAL TANK DIAMETER: 45 m3 2.400 mm BODY TANK THICKNESS: 45 m3 10 mm HEAD TANK THICKNESS: 45 m3 12 mm TOTAL LENGTH OF TANKIN: 45 m3 11.200 mm CORROSION: 1 mm TANK VOLUME: 45 m3 EQUIPMENT TANKS: Hydraulic Operator 1 unit 2 "Ball Valve 2 Unit BATU 2 ”Hydraulic valves 1 piece? LEAP 3 ”Hydraulic valves 1 unit ATILIM 2 "Safety Valve? 2 pieces ATILIM Rotogauge 1 piece ATILIM Glycerin manometer (0-25 bar), Ø 63 1 piece PAKKENS Thermometer (-30 / 60 ° C) Ø63 1 unit PAKKENS Acme Filler Cap 2 pieces ATILIM Manhole 1 piece 16 16 Filter 1 piece EXPLOSION AND PAINTING: Before painting, Tank will be sandblasted with SA 2.5 quality primer and polyurethane based white topcoat will be applied and total min. 150 microns. COLOR: WHITE CONTROL (INSPECTION AND TESTS): All tests and inspections mentioned below are carried out under the control of the third party and approved by the same institution. Control and approval of design and calculations, Material inspection and stamp transfer separately, Visual and dimensional inspection plate orientation, Head control, Radiographic control, Penetrate dye test, Hydrostatic test Reports of A / M tests and inspections shall be submitted to the customer together with the inspection certificate of the tank and the tank to be issued by the third party upon completion of the inspections. the cERTIFICATION ISO 9001-2008 and EN 3834-2 WELDING METHOD: All welders are certified according to EN 287-1: 2004. Full Penetration of weld seams shall be ensured. The welding will be done by welders as submerged arc welding. The grooves shall comply with EN ISO 9692-2. Flux-filling material with EN ISO 14171 and EN 760. baffles: The tank will have 3 units of Anti-slosh compartment. 2. SEMI TRAILER TECHNICAL DETAILS: 3 AXLES SEMI TRAILERS CHASSIS: The semi-chassis is made of 6252 steel. HEAVY DUTY Type AXLE: Brand: COOL AXLE 12 TONS. Capacity: 3X12 ton / per axle Type: Air suspension Axle Drum Brake SUSPENSION SYSTEM: Air suspension BRAKE SYSTEM : WABCO ABS (GERMAN) LIFTING JACK (LANDING GEARS): The OMS brand has double speed and a capacity of 25 tons each. TIRES: Size 385X65X22,5 BRIDGESTONE 7 pieces. BALL VALVE BOXES: Valves to the right RIMS: Size R22,5 7 units JANTSA Brand FENDER are: Steel body with aluminum coating KING PIN: 2 "flanged and high bending stress and rupture Durable steel and bolted to the system can be removed and replaced easily. King Pin plate thickness will be 12 mm and min. 3 + 2 steel 160 NPU. ELECTRICAL SYSTEM: There are 24 V electrical systems with European norms. In addition, there will be tank-top and trailer-top and electric lamp and warning posters. (ADR) 2 stop lamps in the Rear Bumper, 5 lamps on each side of the tank. REFLECTOR are: 3M Brand yellow on both sides of the tank and 3M Brand red on the rear bumper and rear dished heads. ACCESSORIES: 1 pcs Steel Bumper 1 water tank (made of 30 lt plastic capacity) 1 spare tire carrier basket 2 wheel chocks and connection 2 Fire Extinguisher Cabinets (ADR) 2 Food and Tool Boxes are made of steel. Tunnel to be mounted on the tank